Option Installation 3-9
Figure 3-8 Locating Minitower Expansion Slots
Installing an Expansion Board
Install expansion boards in the system as follows (see the following figure).
1.
Remove the system unit cover.
2.
Follow any preinstallation instructions that come with the expansion board (such
as setting switches or jumpers on the board).
3.
If installing a board in the inside expansion slot (next to the power supply) in the
desktop system, see “Installing an Expansion Board in the Inside Slot.”
Otherwise, continue to the next step.
4.
Remove the screw securing an expansion slot cover and remove the cover.
Save the screw for installing the expansion board. Save the slot cover for future
use.
Summary of Contents for POWERMATE P2166
Page 217: ...Index 4 ...
