Maintenance and Troubleshooting 4-13
Table 4-5 Diagnostic Beep Codes
Message
Beeps
Description of Failure
Processor Exception Interrupt
Error
7
The CPU generated an exception interrupt.
Display Memory Read/Write
Error
8
The system’s video adapter is either missing or its
memory is faulty. This is not a fatal error.
ROM Checksum Error
9
ROM checksum value does not match the value
encoded in the BIOS.
CMOS Shutdown Register
Read/Write Error
10
The shutdown register for CMOS RAM failed.
Cache Error
11
The cache is faulty.
CMOS Battery Replacement
Remove the 3-volt lithium battery from system board as follows.
1.
Turn off and unplug the system unit and any external option connected to it.
2.
Remove the system unit cover.
3.
Locate the battery socket on the system board.
Battery Socket
Figure 4-3 Battery Socket Location
Summary of Contents for POWERMATE PRO150
Page 152: ...A 16 Connector Pin Assignments ...
Page 160: ...B 8 System Board Settings ...