2-28 Setup and Operation
48 KB
64 KB
80 KB
96 KB
NOTE:
If a value of
“
96 KB
”
is selected, then
the ISA Shared Memory Base Address field can
only be set to C8000h; if
“
80 KB,
”
then a value
of C8000 or CC000h, etc.
ISA Shared Memory Base Address
The ISA Shared Memory Base Address field is only displayed when an ISA
Shared Memory Size has be selected. The choices are as follows.
C8000h (default)
CC000h
D0000h
D4000h
D8000h
DC000h
Boot with PnP OS
The Boot with PnP OS field enables the system to boot with an operating system
capable of managing plug and play add-in cards. The choices are as follows.
None
Other
Windows 95 (default)
Available interrupt requests (IRQ) between IRQ3 through IRQ15 will be
displayed. Interrupts consumed by on-board resources will not be visible (IRQ4
serial port 1, IRQ3 serial port 2, IRQ7 parallel port, and IRQ15 IDE interface).
NOTE:
All but one IRQ can be set to
“
Used By
ISA Card.
”
One must remain available for a PCI
expansion board.
Summary of Contents for POWERMATE PRO150
Page 152: ...A 16 Connector Pin Assignments ...
Page 160: ...B 8 System Board Settings ...