Option Installation 3-25
3.
Replace the bracket screw you removed earlier to secure the bracket in place.
Figure 3-20 Securing the 3 1/2-Inch Drive Bracket
4.
Continue at step
9
of the “Installing the 3 1/2-Inch Drive” procedure.
Removing the Front Panel
Remove the front panel only if you are installing a 5 1/4-inch device. The front panel does
not need to be removed if you are installing a 3 1/2-inch hard disk drive.
If you are installing a 3 1/2-inch hard disk drive, see “Installing the 3 1/2-Inch Drive.”
1.
Remove the system unit side panel (see “Removing the Side Panel”).
2.
Remove the front panel screw securing the panel to the system unit.
Device
Cage
Drive
Bracket
Summary of Contents for POWERMATE PRO150
Page 152: ...A 16 Connector Pin Assignments ...
Page 160: ...B 8 System Board Settings ...