2-22 Setup and Operation
This field should only be enabled if all of the following conditions occur:
An ISA board connects to the PCI graphics board via the VESA compatible
feature connector.
The ISA board connects to a color monitor.
The board used the RAMDAC on the PCI board.
The palette snooping feature is broken on the PCI board.
DMI Event Logging
Use this menu to configure DMI and ECC event logging features:
Event logging Capacity
This read-only field shows event logging capacity, for example, “space available.”
Event Logging Validity
This read-only field shows event logging status, for example, “valid.”
View DMI Log
Press
Enter
to view the DMI log.
Clear all DMI Event Logs
“No” is the default; select “Yes” to clear logs.
Event Logging
Enable or disable DMI event logging from this field. The default is “Enabled.”
Prompt on POST Errors
When this field is set to “Enabled” and errors are detected during POST, the
POST pauses and you are prompted for input.
ECC Event Logging
Enable or disable ECC event logging from this field. The default is “Enabled.”
(This field displays only if ECC DIMMs are detected.)
Mark DMI Events As Read
Press
Enter
to mark DMI events.
NOTE:
If no events have been logged, the Mark
DMI Events As Read field is read-only.
Security Menu
The Security Menu allows you to restrict access to the computer. The following fields are
available through the Security menu:
User Password Is