2-36 Setup and Operation
Using the Chassis Intrusion Notification Feature
LANDesk Client Manager allows you to monitor the system against chassis intrusion.
Whenever the chassis is opened, LANDesk Client Manager logs the intrusion and reports
the incident in a screen message the next time the system is booted. The message appears in
a LANDesk Client Manager Notification window. This window appears every time the
system is rebooted until the report is cleared.
Close the notification window to remove the message from the screen. Clear the message to
prevent it from appearing again the next time the system is rebooted.
To clear the message, follow these steps.
1.
Access LANDesk Client Manager.
If the LANDesk Client Manager Notification window is still open, click
Yes
,
and then click the
Client Manager
button.
From the Windows desktop, click
Start
on the taskbar, point to Programs,
point to
LANDesk Client Manager
, and click
LANDesk Client Manager 3.0
.
LANDesk Client Manager opens.
2.
Open the Tools menu and click
PC Health
. The PC Health window appears. The
Chassis Opened field displays the
Yes
setting.
3.
Click
Clear
next to the Chassis Opened field.
4.
Exit from LANDesk Client Manager.
NEC Auto Backup
On systems that use the Windows 95 operating system, NEC Auto Backup is a data
management and backup program that operates in conjunction with LANDesk Client
Manager’s DMI and the Self-Monitoring Analysis and Reporting Technology (S.M.A.R.T.)
Hard Drive instrumentation. If the S.M.A.R.T. drive identifies a potential problem, the NEC
Auto Backup utility automatically invokes the Cheyenne Backup program and backs up the
entire file system to a user-selected backup device, such as a Zip drive or network drive.
NEC Auto Backup can also do regularly-scheduled backups and scan files for viruses
during a backup operation.
NOTE:
For the NEC Auto Backup utility to
work, Cheyenne Backup must be preconfigured.
See the NEC Auto Backup utility “Read Me” file
for information about Cheyenne Backup.