2-46 Setup and Operation
Highlighting the “Internet MIB” policy opens the contact name and location
fields in the Policy window for editing.
5.
Click
File
and click
Save.
6.
Click
File
and click
Exit
.
Configuring the NEC SNMP Agent for Windows NT
Configure the NEC SNMP Agent for Windows NT as follows.
1.
In the Windows taskbar, click
Start
, point to
Settings
, and click
Control Panel
.
2.
At the Control Panel, double click the
Network
icon.
3.
At the Network screen, click the
Services
tab and click
Add
.
4.
At the Select Network Services screen, highlight
SNMP Service
, and click
OK
.
5.
At the Microsoft SNMP Properties screen, there are three properties that must be
set:
Security — Limits the set of computers than can perform SNMP management
on this computer to those in the community and/or specific computer names
the user provides.
Traps — Limits the set of computers that receive traps from this computer to
those in the community and/or specific computer names the user provides.
NOTE:
For an SNMP management console,
such as the NEC Desktop Manager and HP
OpenView, IP addresses (for example,
157.123.176.100) must be entered in the Traps
for “Public Community” to receive traps from
the NEC SNMP agents.
For the NEC SNMP Agent to send a trap to
the NEC SNMP Desktop Manager, the port
number can be configured from the registry:
“HKEY_LOCAL_MACHINE\SOFTWARE\Packard
Bell NEC,Inc.\PBNEC SNMP Desktop Agent\Port
Number”
. The default port number is set to
55593.
Agent — Allows the user to specify a contact name and location for the
computer.