Setup and Operation 2-55
Follow these steps to perform a customized restore of your original, factory-installed
operating system using OS Restore:
1.
Power on or restart the system and immediately insert the Select Install disc into
the CD-ROM reader.
NOTE:
For systems with a SCSI hard disk, a
bootable diskette is included with the NEC Select
Install CD. In SCSI systems, first boot the
system from the bootable diskette. After the
system boots, proceed with the NEC Select
Install procedure described below.
After the system boots from the CD, the Operating System Restore Welcome
screen appears (see the following figure).
Figure 2-21 Welcome Screen
3.
Click
Continue
to continue (or
Exit
to exit the program).
A License Agreement screen appears with three options: Back, Reject, and
Accept.
The
Back
button returns you to the Welcome screen.
The
Reject
button terminates the restoration process.
The
Accept
button signals that you accept the terms of the license and allows
you to continue.