Setup and Operation 2-59
7.
To partition the hard drive, click
Continue
on the Partitioning the Hard Drive
screen. The Partition Information screen appears (in Windows 95 systems only; in
Windows NT 4.0 systems, the FAT16 Partition warning appears as described later
in this procedure).
The Partition Information screen has three options and lets you select the File
Allocation Table (FAT) type you want to use for the operating system restore:
Click
Back
to return to the Operating Mode screen.
Click
FAT 16
to select the FAT16 allocation table (current FAT type).
Click
FAT 32
to select the FAT32 allocation table (available for Windows 95
systems only).
NOTE:
Some older software may not work in a
Windows 95 system configured for FAT 32.
Figure 2-26 Partition Information Screen
NOTE:
In Windows NT 4.0 systems, the
Partition Information screen does not appear.
Instead, the FAT16 Partition warning appears.
This screen is described in the following
paragraph.
8.
After you select the FAT type, a warning screen appears indicating that the
system is about to partition and format your hard disk using the FDISK program.
This warning screen contains three options: Back, Exit, and Continue.
Click
Back
to return to the Partition Information screen.
Click
Exit
to terminate the restore process.
Click
Continue
to perform FDISK.