Option Installation 3-31
Replacing the Front Panel
If you remove a 5 1/4-inch device from the system, you need to cover the accessible device
slot with a metal slot cover, and fit a plastic blank panel over the metal slot cover. Do this
before replacing the front panel.
Replace the front panel by performing the following steps:
1.
Place a metal slot cover over the accessible device slot if necessary. Secure the
slot cover with the slot cover screws.
Figure 3-25 Replacing the Accessible Device Slot Cover
2.
Replace the plastic blank panel if necessary. Press the tabs on the backside of the
panel together slightly, and insert them into the slots on the metal slot cover on
the accessible device slot.