3-34 Option Installation
Figure 3-28 Securing a 5 1/4-Inch Device
7.
Replace the front panel (see “Replacing the Front Panel”).
8.
Replace both side covers on the system unit (see “Replacing the Covers”).
9.
Run the Setup program to set the new configuration (see “Setup Utility” in
Chapter 2).
Replacing the 3 1/2-Inch Internal Hard Disk Drive
The system supports two internal hard disk drives in the drive cage within the chassis. You
can upgrade the system by replacing an existing hard disk drive, or by adding an additional
hard disk drive.
If the system has one hard disk drive, it should be located in the lower of the two bays in the
drive cage. If you are adding an additional hard disk drive, install it in the upper of the two
bays.
NOTE:
You can also install a 3 1/2-inch hard
disk drive in a 5 1/4-inch accessible device slot.
Place the device in a 5 1/4-inch frame adapter
and then follow the instructions in “Installing a
5 1/4-Inch Device.”