3-38 Option Installation
4.
Lift the drive cage up slightly to free the large hooked tabs from the slots in the
chassis.
5.
Pull the drive cage away from the chassis.
Replacing the Drive Cage
Replace the drive cage in the chassis by following these steps:
1.
Hook the large tabs on the left rear edge of the drive cage into the slots on the left
rear edge of the chassis.
2.
Swing the drive cage into the chassis.
3.
Line up the holes on the rear of the drive cage with the holes in the chassis.
4.
Secure the drive cage with the drive cage screws.
Figure 3-33 Replacing the Drive Cage