Repair 5-3
Expansion Board Removal
To remove an expansion board, see “Expansion Boards” in Section 3.
Front Panel Removal
Remove the front panel as follows.
1.
Four metal tabs hold the front panel to the front of the system unit. Remove the
front panel by evenly pulling it away from the system unit to release the tabs.
Figure 5-1 Removing the Front Panel
Blank Panel and Metal Slot Cover Removal
Remove the blank panel from the front panel and the metal slot cover from the chassis as
follows.
1.
Remove the front panel as previously described.
2.
Press the tabs on the back side of the plastic blank panel together slightly and pull
the panel free from the metal slot cover (see Figure 5-2). Set the panel aside.