Jumper Settings B-9
SCSI ID=13, A3, A2, and A0 jumpered
SCSI ID=14, A3, A2, and A1 jumpered
SCSI ID=15, A3, A2, A1, and A0 jumpered
Quantum Viking
The Quantum Viking 4.5-GB SCSI drive uses jumper blocks A3, A2, A1, and A0 to
configure the SCSI ID for the drive. See the documentation that comes with the drive for
more information on when and how to configure the drive. The SCSI ID jumpering is listed
below.
SCSI ID=0, no jumpers
SCSI ID=1, A0 jumpered
SCSI ID=2, A1 jumpered
SCSI ID=3, A1 and A0 jumpered
SCSI ID=4, A2 jumpered
SCSI ID=5, A2 and A0 jumpered
SCSI ID=6, A2 and A1 jumpered
SCSI ID=7, A2, A1, and A0 jumpered
SCSI ID=8, A3 jumpered
SCSI ID=9, A3 and A0 jumpered
SCSI ID=10, A3 and A1 jumpered
SCSI ID=11, A3, A1, and A0 jumpered
SCSI ID=12, A3 and A2 jumpered
SCSI ID=13, A3, A2, and A0 jumpered
SCSI ID=14, A3, A2, and A1 jumpered
SCSI ID=15, A3, A2, A1, and A0 jumpered
Seagate Cheetah
The Seagate Cheetah 9.1-GB SCSI drive uses pins 1 - 8 on jumper blocks J6 and J5 to
configure the SCSI ID for the drive. See the documentation that comes with the drive for
more information on when and how to configure the drive. The SCSI ID jumpering is listed
below.
SCSI ID=0, no jumpers
SCSI ID=1, pins 1 - 2 jumpered
SCSI ID=2, pins 3 - 4 jumpered
SCSI ID=3, pins 1 - 2 and 3 - 4 jumpered