2-4 Setup and Operation
3.
Connect the keyboard, mouse, monitor, and printer cables to the back of the
system (see Figure 2-3). The monitor connects to the VGA monitor connector on
the AGP video board (if installed) or the PCI video board installed in one of the
expansion slots.
Figure 2-3 Peripheral Connections
4.
If the system comes with a fax/modem board, connect the fax/modem to the
telephone line as follows:
Unplug the telephone from the telephone jack on the wall.
Plug the telephone cable that comes with the system into the line jack on the
system (see Figure 2-4) and into the telephone jack on the wall.
Plug the cable on the telephone into the phone jack on the system.
Figure
2-4
Fax/Modem
Connections