Setup and Operation 2-5
5.
If the system comes with 9-watt speakers (see Figure 2-5), connect them by
following these steps.
Figure
2-5
Nine-Watt
Speakers
Locate the left speaker and its attached speaker cable.
Insert the left speaker cable connector into the SPKR OUT jack on the rear of
the right speaker (see Figure 2-6).
Locate the right speaker and the two-connector speaker cable.
Insert one end of the cable into the INPUT jack on the rear of the right
speaker (see Figure 2-6).
Insert the other end of the cable into the Line Out jack on the rear of the
system unit (see Figure 2-7 for audio connector locations).