2-12 Setup and Operation
check the installation of optional memory by comparing the amount of memory
installed with the amount of memory displayed by Setup.
change certain system operating parameters, such as boot device sequence and
keyboard parameters.
set the processor speed.
clear the password.
configure system connections for peripherals such as the diskette drive, hard disk
drives, and devices connected to the printer port and serial ports.
customize the system with security features such as passwords, diskette drive
restriction, virus check reminder, and system backup reminder.
set system parameters in the event that you need to replace the complementary
metal oxide semiconductor (CMOS) battery.
How to Start BIOS Setup
To start the BIOS Setup utility, follow these steps:
1.
Turn on or reboot the system.
2.
Press
F2
as soon as you see this message:
Escape to view boot, F2 to enter BIOS Setup.
You have about five seconds to press
F2
before the system boot continues.
3.
Setup’s Main Menu appears and looks similar to the following screen.