5-32 Installing Options
Connecting Device Cables
The cables used for installing optional storage devices
include the following:
diskette drive signal cable
IDE signal cables
internal SCSI cables
system power cables.
The system comes with two three-connector IDE signal
cables; one connects to the primary PCI/IDE connector and
the other connects to the secondary PCI/IDE connector.
Each IDE cable supports two devices. The system also
comes with a three-connector diskette drive signal cable.
The diskette drive cable supports two devices, one of which
is the standard diskette drive
Cable connector locations on the system board are shown in
the following figures.
IDE and diskette drive connectors on the system board