5-40 Installing Options
Internal SCSI Device Cabling
The following procedure explains how to cable an internal
SCSI device.
NOTE
The appearance of your device may vary
from the one shown.
1.
Remove the termination from the appropriate connector
on the SCSI device.
2.
Connect the appropriate connector on the SCSI device
cable to the SCSI cable connector on the SCSI device.
3.
Locate an available power connector coming from the
power supply
4.
Connect the power cable to the power connector on the
SCSI device (see “System Power Cables”).
Connecting internal SCSI device cables