5-60 Installing Options
8.
Press the down or up arrow key until the
Exit Saving
Changes
submenu item is highlighted. Press
Enter
.
Press
Enter
again.
9.
The system restarts.
Connecting an External SCSI Device
If your computer has its external SCSI connector installed,
you can daisy-chain external SCSI devices to your system.
Before connecting any external SCSI device see the
documentation that comes with the device for instructions
on jumpering the device, terminating the device, and
assigning a SCSI ID.
For information on installing the external SCSI connector,
see “Installing the External SCSI Connector Kit.”
To connect an external SCSI device, follow these steps:
NOTE
Before connecting an external SCSI device
to the system, be sure the device is set up correctly.
Follow the instructions that come with the option.
1.
Turn off power to the system and to the SCSI device.
2.
Connect one end of the SCSI cable to the SCSI
connector at the rear of the system unit.
External SCSI connector