Setting Jumpers 6-9
Quantum Viking
The Quantum Viking SCSI drive uses jumper blocks A3,
A2, A1, and A0 to configure the SCSI ID for the drive. See
the documentation that comes with the drive for more
information on when to configure the drive. The SCSI ID
jumpering is listed below.
SCSI ID=0, no jumpers
SCSI ID=1, A0 jumpered
SCSI ID=2, A1 jumpered
SCSI ID=3, A1 and A0 jumpered
SCSI ID=4, A2 jumpered
SCSI ID=5, A2 and A0 jumpered
SCSI ID=6, A2 and A1 jumpered
SCSI ID=7, A2, A1, and A0 jumpered
SCSI ID=8, A3 jumpered
SCSI ID=9, A3 and A0 jumpered
SCSI ID=10, A3 and A1 jumpered
SCSI ID=11, A3, A1, and A0 jumpered
SCSI ID=12, A3 and A2 jumpered
SCSI ID=13, A3, A2, and A0 jumpered
SCSI ID=14, A3, A2, and A1 jumpered
SCSI ID=15, A3, A2, A1, and A0 jumpered