4-4 Configuring the System
How to Start Setup
To start the Setup utility, follow these steps:
1.
Turn on or reboot the system.
2.
Press
F2
after POST begins, but before the system boots
up, to start the memory test. You have about five seconds
to press
F2
before system boot continues.
Setup’s Main Menu appears.
How to Use Setup
The bottom of all menus show the specific keys used to
navigate around the menus. Pressing the
F1
key brings up a
Help screen. The right-hand side of the menu is pop-up item-
sensitive help.
Use the left and right arrow keys (or cursor keys) to select
one of the menus (Main, Advanced, Security, etc.) and the up
and down arrows to move to an option within a menu. Press
Enter
to select an option or submenu. Change the value either
with the arrows or with the plus and minus (+ or –) keys.
Some entries cannot be changed; their function is to report
the status of a system parameter. Other entries, when marked
with an arrow (
) symbol, lead to submenus when you press
Enter
.
Use
Esc
to return to a previous menu or to “escape” from the
Setup program without changing any settings. When exiting
and the menu asks if you want to discard configuration
changes and exit now, be sure the menu’s “Yes”
field is
highlighted.
Summary of Contents for PowerMate SPB-Wash
Page 55: ...4 Configuring the System System BIOS and the Setup Utility BIOS Flash Utility Video Drivers...
Page 161: ...B System Specifications Standard Features Environmental Specifications...
Page 177: ...C System Board Connectors and Error Messages System Board Connectors Error Messages Beep Codes...
Page 220: ...Index 5 Z Zip drive release button data lamp 1 14 using 1 13...
