2-8 Setup and Operation
n
configure system connections for peripherals such as the diskette drive, hard
drives, and devices connected to the printer and serial ports.
n
customize the system with security features such as passwords, diskette drive
restriction, virus check reminder, and system backup reminder.
n
set system parameters if the CMOS battery or real-time clock/battery module
needs replacing.
How to Start Setup
To start the Setup utility, follow these steps:
1.
Turn on or reboot the system. Setup displays the following message:
Press <F2> to enter SETUP
2.
Press
F2
. Setup’s Main Menu window appears similar to the following screen.
NOTE:
The screen shown is typical of the
system. The actual items on the Main Menu
depend upon the hardware installed in the
system.
Main Menu
PhoenixBIOS Setup — Copyright 1992-96 Phoenix Technologies Ltd.
Main Advanced Security Power Boot Exit
System Time
[
10
:19:20]
Item Specific Help
System Date
[02/12/1996]
Diskette A
[1.44 MB, 3 ½"]
<Tab>, <Shift-Tab>, or
Diskette B
[Not Installed]
<Enter> selects field.
> IDE Adapter 0 Master
C: 1280 Mb
> IDE Adapter 0 Slave
None
> IDE Adapter 1 Master
None
> IDE Adapter 1 Slave
None
Video System
[EGA/VGA]
> Memory Cache
> Memory Shadow
[Enabled]
> Boot Options
> Numlock
[Auto]
System Memory
640 KB
Extended Memory
15 MB
F1
Help
↑↓
Select Item
-/+
Change Values
F9
Setup Defaults
ESC Exit
←→
Select Menu
Enter Select > Sub-Menu
F10 Previous Values
