2-24 Setup and Operation
After completing downloading of the file, log off the BBS as follows.
1.
Press
Enter
(to continue).
2.
Press
G
(command for Goodbye/Hangup).
3.
Press
Enter
.
Using the BIOS Update Utility
Update the BIOS from the BIOS flash diskette as follows.
1.
Write down the Setup parameters currently set on the system.
2.
Turn off the system.
3.
Insert the flash diskette in drive A, and turn on the system.
4.
The update procedes automatically and shows a BIOS Update successfully
completed message when done.
5.
Press any key to reboot the system.
6.
Remove the flash diskette.
