Installation Guide
QX-S6600 Series Ethernet Switches
6-19
Item
Description
Gateway IP Address
IP address of the gateway (in this example, no gateway is required
because the server and the switch are on the same subnet).
FTP User Name
Username for accessing the FTP server, which must be the same as
configured on the FTP server.
FTP User Password
Password for accessing the FTP server, which must be the same as
configured on the FTP server.
NOTE:
To use the default setting for a field, press
Enter
without entering any value.
If the switch and the server are on different subnets, you must specify a gateway
address for the switch.
3) Enter all required parameters, and enter
Y
to confirm the settings. The following
prompt appears:
Are you sure to download file to flash? Yes or No (Y/N):Y
4) Enter
Y
to start downloading the image file. To return to the Boot menu, enter
N
.
Loading......................................................................
.............................................................................
.............................................................................
................................................................Done!
5) Enter the
M
(main),
B
(backup), or
N
(none) attribute for the images. In this example,
assign the main attribute to the images.
Please input the file attribute (Main/Backup/None) M
The boot.bin image is self-decompressing...
Free space: 534980608 bytes
Writing
flash...................................................................
.............................................................................
...................................................................
Done!
The system.bin image is self-decompressing...
Free space: 525981696 bytes
Writing
