Installation Guide
QX-S6600 Series Ethernet Switches
3-1
3 Installing the switch
CAUTION:
Keep the tamper-proof seal on a mounting screw on the chassis cover intact. If you tear off the tamper-proof
seal, switch shall not be guarantee applying. If you tear off the tamper-proof seal and open the chassis, NEC
shall not be liable for any consequence caused thereby.
Hardware installation flow
Yes
Connect the
grounding cable
Rack-mount
the switch
Start
Connect the power
cords
Verify the installation
Power on the switch
Operating
properly?
Power off the
switch
Troubleshoot the
switch
No
End
Install fan trays
Install power supplies