CONFIGURATION GUIDE
–
NEC Express5800/R120d-2E Storage-Rich
NEC Corporation
Revision 7.0
– October 25, 2013
42
References
Server Management
The EXPRESSSCOPE Engine 3, integrated into the server, provides superior remote control and system
management features listed in the table below.
Standard
With Remote KVM
and Media License
kit
Hardware
monitoring
Temperature/voltage/power/
fan /degeneration (memory/hard drive)
Hardware configuration information collection
Hardware event log collection
Boot monitoring
BIOS/POST stall, Booting, OS stall, shutdown
1
1
Alerting
HW error, Boot error , and OS panic
(by SNMP, E-Mail)
Remote KVM
(via LAN)
POST/BIOS setup, ROM utility
2
Panic screen, Boot screen
2, 3, 4
CUI-based screen (OS console)
2, 4
GUI-based screen (OS console)
-
Remote control
(via LAN)
Remote reset/power on-off/ dump
Remote power capping
BIOS/BMC FW update
Remote BIOS setup(partial configuration only)
OS shutdown
1
1
Remote media (CD/DVD/FD/USB)
-
CLP (Command Line Protocol) (DMTF compliant)
Remote control via Web browser (multi user login
at the same time)
Scheduling (without UPS)
1
1
Maintenance
EXPRESSSCOPE® Profile key
(Backup/restore BIOS/BMC setup information)
Others
Set automatic IP address via DNS/DHCP
LDAP/Active Directory verification/user control
Clock synchronization of main unit and the RTC
Access log collection
Industry
standard
IPMI
2.0
2.0
1
The feature is not supported on VMware ESXi systems.
2
The optional serial port is not available for the feature.
3
Monitoring boot screens is not supported on VMware systems.
4
In VMware systems, only the direct console user interface is supported.
