E – 17
AUTO ADJ.
VOLUME
MENU
E
N
TE
R
CA
NC
E
L
OFF
VIDEO
S-VIDEO
RGB
ON
HELP
ASPECT
POINTER
MAGNIFY
MUTE
SELECT
POWER
PJ
AUTO ADJ.
VOLUME
MENU
E
N
TE
R
CA
NC
E
L
PJ
OFF
VIDEO
S-VIDEO
RGB
ON
HELP
ASPECT
POINTER
MAGNIFY
MUTE
SELECT
POWER
Switching operation mode between computer and rear projection display
The three shaded buttons shown on the drawing work as a computer mouse in the Computer mode.
In the Computer mode the PJ button is not lit.
• When the POWER ON/OFF, MENU, POINTER, HELP, ASPECT or MAGNIFY button is pressed, the PJ button lights red to indicate that you are
in the rear projection display mode, which allows the rear projection display menu operation using the three buttons.
• If no buttons are pressed within 10 seconds, the PJ button's light goes out to indicate that you are in the Computer mode. To enable the rear
projection display menu operation again, press the PJ button to light red.
• When the PJ button is lit, if you want to use the mouse function immediately, press the PJ button to return to the Computer mode (not lit).
Works as the Select button on
the rear projection display.
Not lit
Works as a mouse for your
computer.
Works as a right-click button for
your computer.
Works as a left-click button for
your computer.
Lit red
Works as the Enter button on
the rear projection display.
Works as the Cancel button on
the rear projection display.
During Computer mode:
During Computer mode by pressing the ENTER button for 1.5 sec-
onds or more then releasing, the drag mode is set and the drag opera-
tion can be performed simply by pressing the SELECT (
▲
,
▼
,
,
)
(mouse) button. To cancel the drag mode, press the ENTER (left click)
button again or press the CANCEL (right click) button.
