E – 20
1. Open and attach the ferrite clamp core to a signal cable as close as
possible to the end that goes to the rear projection display.
* Push the catch to open the ferrite clamp core.
Information for Reducing Radiation of Electromagnetic Waves
To reduce unnecessary radiation of electromagnetic waves, use the supplied ferrite clamp core.
Band
Using the RGB INPUT (BNC) on the Rear Terminal Panel
Use a commercially available BNC
5 cable to connect your switcher, PC, DVD player or workstation.
V
H/H
V
B/C
b/P
b
G/Y
R/C
r/P
r
L/M
ON
O
R
AC
IN
VID
E
S-V
IDE
O
AU
DIO
RG
B IN
PU
T
IN P
OW
ER
OFF
REAR
RGB INPUT
FRONT
/
AUDIO
AUDIO
L / MONO
R
S-VIDEO
VIDEO
PC
PC
VCR
Front Terminal Panel
Push to select the rear
terminal
BNC
5 cable
(commercially available)
Audio cable RCA pin
(commercially available)
Ferrite clamp core (supplied)
2. Close the ferrite clamp core tightly.
3. Fix the supplied band to the cable as a stopper.
* Pull the end of the band to tighten it. Cut off the surplus of the band.
NOTE: Be sure to use the ferrite clamp core at the end of the signal cable.
Use care in cutting the band to avoid possible injury to fingers or fly-off.
Red
White
