background image

English

English-6

Basic Operation

Selecting Tuner

  Press OPTION button on the remote.

Opening Tuner OSD menu

  When the input signal of the monitor is “OPTION”, press OPTION button to turn on/off the Tuner OSD.

NOTE : If your monitor’s Wireless Remote Control has “OPTION MENU” button, press the button.

Wireless Remote Control

NOTE : Use your monitor’s Wireless Remote Control. For details about procedures other than those listed below, or, if your Wireless Remote 

Control is different from the picture below, see the monitor’s user’s manual.

1. POWER button

  Switches the power on/standby.

2. ASPECT button

  Selects picture aspect, [FULL],[WIDE],[ZOOM] and 

[NORMAL].

3. OPTION button

  Set Input signal to “OPTION”. When “OPTION” is set, turn 

on/off the Tuner OSD.

4. KEYPAD

  Press buttons to set and change passwords and change 

channel.

5. ENT button

  Sets channels.

6. DISPLAY button

  Turn on/off the current channel information.

7. MENU button

  Turn on/off the monitor OSD menu. 

Refer to your monitor’s user’s manual for more monitor OSD 

information.

8. UP/DOWN button

  Act as 

 button to move the highlighted area up or down 

to select items within OSD menu.

9. MINUS/PLUS (-/+) button

  Act as     button to move the highlighted area right or left 

to select items within OSD menu.

10. EXIT button

  Returns to previous menu within OSD menu.

11. VOLUME UP/DOWN button

  Increases or decreases audio output level.

12. GUIDE button

  Turn on/off EPG (Electronic Program Guide).

13. CH +/- button

  Moves channel up or down.

14. MUTE button

  Turn on/off the audio mute.

  When mute is on, S/PDIF OUT is also muted.

15.   button

  Activates closed captioning.

16. MTS button

  Select Multi-language.

Summary of Contents for SB-03TM


















Reviews: