- 11 -
CAUTION
Connect firmly.
Insert this product into a Blade Enclosure (SIGMABLADE) securely and fix the eject lever
with the stopper when installed. If this product is inserted incompletely or the eject lever is not
fixed with the stopper, smoke and/or fire may occur.
Do not use any unauthorized interface cable.
Use interface cables authorized by NEC only. Check the devices and connectors to which the
interface cables are connected. Using an unauthorized cable or connecting an interface cable
to an incorrect device or connector may cause an electric shock and/or fire to occur. Observe
the following notes on the uses and connections of interface cables.
Do not use any damaged cable.
Do not step on the cable.
Do not place any object on the cable.
Do not alter, modify, or repair the cable.
Do not use a cellular phone or pager around this product.
Turn off the cellular phone or pager. Radio interference may cause malfunctions of this
product.
Do not use or store this product in corrosive environment.
Avoid the usage or storage of this product in an environment which may be exposed to
corrosive gases, such as those including but not limited to: sulfur dioxide, hydrogen sulfide,
nitrogen dioxide, chlorine, ammonia and/or ozone. Avoid installing this product in a dusty
environment or one that may be exposed to corrosive materials such as sodium chloride
and/or sulfur. Failure to follow this instruction may corrode printed circuit boards in this
product, resulting in damage to this product and even smoke and/or fire. If there are any
concerns regarding the environment at the planned site of installation or storage, please
contact your service representative.
