background image

English−14

Manufacturer’s Recycling

SHARP NEC DISPLAY SOLUTIONS is strongly committed to environmental protection and sees recycling as one 

of the company’s top priorities in trying to minimize the burden placed on the environment. We are engaged 

in developing environmentally-friendly products, and always strive to help define and comply with the latest 

independent standards from agencies such as ISO (International Organization for Standardization) and TCO 

(Swedish Trades Union).

Disposing of your old NEC product

The aim of recycling is to gain an environmental benefit by means of re-use, upgrading, reconditioning or 

reclamation of material. Dedicated recycling sites ensure that environmentally harmful components are properly 

handled and securely disposed. To ensure the best recycling of our products, SHARP NEC DISPLAY SOLUTIONS 

offers a variety of recycling procedures and gives advice on how to handle the product in an environmentally 

sensitive way, once it has reached the end of its life.
All required information concerning the disposal of the product and country-specific information on recycling 

facilities can be found on our following websites:
https://www.sharpnecdisplays.eu (in Europe),
https://www.sharp-nec-displays.com (in Japan) or
https://www.sharpnecdisplays.us (in USA).

WEEE Mark (European Directive 2012/19/EU and amendments)

Disposing of your used product: In the European Union

EU-wide legislation as implemented in each Member State requires that used electrical and electronic 

products carrying the mark (left) must be disposed of separately from normal household waste. This 

includes monitors and electrical accessories, such as signal cables or power cords. When you dispose of 

such products, please follow the guidance of your local authority or ask the shop where you purchased the 

product, or if applicable, follow applicable legislation or agreement you may have. The mark on electrical 

and electronic products may only apply to the current European Union Member States.

Outside the European Union

If you wish to dispose of used electrical and electronic products outside the European Union, please contact your local 

authority and ask for the correct method of disposal.

Summary of Contents for SP-RM3















Reviews: