English−2
Important monitor information
WARNING:
To prevent fire or shock hazards, do not expose this unit to rain or moisture.
Do not connect or disconnect this product during an electrical storm.
Also, do not use this unit’s polarized plug with an extension cord receptacle or other outlets unless the prongs
can be fully inserted.
Refrain from opening the cabinet as there are high voltage components inside. Refer servicing to qualified
service personal.
CAUTION:
To reduce the risk of electric shock, make sure the power cord is unplugged from the wall socket.
To fully disengage the power to the unit, please disconnect the power cord from the AC outlet.
Do not remove cover (or back). No user serviceable parts inside.
Refer servicing to qualified service personnel.
Please use the power cord provided with this display in accordance with the power cord table. If a power cord
is not supplied with this equipment, please contact Sharp NEC Display Solutions, Ltd. For all other cases,
please use the power cord with the plug style that matches the power socket where the monitor is located.
The compatible power cord corresponds to the AC voltage of the power outlet and has been approved by, and
complies with, the safety standards in the country of purchase.
This equipment is designed to be used in the condition of the power cord connected to the earth. If the power
cord is not connected to the earth, it may cause electric shock. Please make sure the power cord is earthed
properly.
This symbol warns user that uninsulated voltage within the unit may have sufficient magnitude to cause electric
shock. Therefore, it is dangerous to make any kind of contact with any part inside this unit.
This symbol alerts the user that important literature concerning the operation and maintenance of this unit has been
included. Therefore, it should be read carefully in order to avoid any problems.
Plug Type
North America
European
Continental
U.K.
Chinese
Japanese
Plug Shape
Region
U.S.A./Canada
EU
U.K.
China
Japan
Voltage
120*
230
230
220
100
* When operating the MultiSync monitor with its AC 125-240V power supply, use a power supply cord that matches the power
supply voltage of the AC power outlet being used.
NOTE:
This product can only be serviced in the country where it was purchased.
•
The intended primary use of this product is as an Information Technical Equipment in an office or domestic environment.
• The product is intended to be connected to a computer and is not intended for the display of television broadcast signals.
