20
Profiler
User Manual
3.2 Selecting a measurement device
After the first start of
SpectraView Profiler 4.1
you need to select a
measurement device first. This can be done via the “File” menu under
“Select measurement device...” or with a click on the instrument icon
in the main window of
SpectraView Profiler 4.1.
You can change the
instrument at any time.
Some measurement devices contain different calibration in- formation
for different monitor technologies. If you have a CRT display, please
select the “CRT” mode and if you have an LCD flat screen please select
“LCD”. This selection is very important for the measurements. A wrong
mode can result in a color cast.
Spectrophotometers do not require different calibration modes.
“Spectral” is a universal mode for CRT and LCD dis- plays. You can use
these devices for CRT and LCD displays.
After selecting the device it needs to be connected and calibrated
before you can use it. For the connection and calibration please click
<Connect>
and follow the instructions for the calibration.
After selecting and calibrating the measurement device you can leave
the dialog by a click on the
<OK>
button.
The pop up window for selecting, connecting and
calibrating the measurement device.
In this area of the main window of SpectraView Profiler
you can see which measurement device is selected.
Calibration position for
Eye-One Pro/Monitor
Calibration position for the
basICColor SQUID/Eye-One display
Summary of Contents for SpectraView Reference 241
