TheaterSync Video Processor User Manual
MKT-0026-UMN-1.002F
The
Operate/Setup
button toggles the
TheaterSync
between “Operate” and “Setup” modes of
operation (as described in the next section of this User Interface chapter).
The
Menu
button is used to invoke the OSM main menu.
The
Up/Down/Left/Right
Arrow buttons are used to navigate the
OSM
.
The
Enter/Select
button is used to activate an OSM menu selection.
Direct (one-touch) input selection is possible using the buttons below:
•
The
RGB
button selects the VGA port as the active input.
•
The
DVI
button selects the DVI port as the active input.
•
The
Video
button selects the composite video port as the active input.
•
The
S-Video
button selects the S-Video port as the active input.
•
The
YPbPr
button selects component video as the active input.
•
The
HDMI
button selects HDMI as the active input.
•
The
SDI
button selects the SDI port as the active input
Additional buttons are available to directly access key video processing features and to cycle
through the available enhancements:
•
The
BCE
button activates/deactivates the Brightness / Contrast Enhancement feature
•
The
Aspect Ratio
button cycles through and selects the available aspect ratio treatments
available for the current input and output mode combination (for description of aspect
ratio treatments, see
section 5.2
)
•
The
TRNR
button accesses the Temporal Recursive Noise Reduction feature, cycling
through the four available settings (Off, Low, Medium, and High)
•
The
CNR
button accesses the Codec Noise Reduction feature, cycling through the four
available settings (Off, Low, Medium, and High)
•
The
Film
button cycles through the three available film mode treatments for active video
(Auto Film/Video mode detect, Force to Video mode, Force to Film mode)
•
The
Split
button activates/deactivates a split-screen mode for direct comparison of the
image with and without noise reduction activated.
4.2
TheaterSync
Operational Modes
TheaterSync
has two operational modes,
Operate
and
Setup.
These modes are selected by a
dedicated key on the IR remote.
TheaterSync
also enables selection of the Operate Mode with
RS-232, USB, or Ethernet.
NEC Solutions, Inc.
Page 17
