14.
Press
or Soft key (Back).
15.
Select “ Server Address”.
Select one of the following operations.
•
Highlight an item by using
, and press
,
or Soft key (OK).
•
Press
.
16.
Enter the IP address of FTP/TFTP
server with digit keys.
Use
for separator of IP address.
•
After entering an IP address, press
or Soft key (OK).
The display goes back to the [Backup/
Restore] screen.
17.
Select “ Data Backup”.
Select one of the following operations.
•
Highlight an item by using
, and press
,
or Soft key (OK).
•
Press
.
18.
Enter the file name by digit keys.
The default file name is displayed.
•
Press Soft key (BK) once to delete the
default file name.
•
Enter the file name that is Backup.
Please refer to
“APPENDIX B INPUT
CHARACTERS” on page 122
for how to
enter the character.
Up to
20
characters can be entered as a file
name.
Do not change the extension of backup file.
The setting data of the terminal can only be
backed up as a (.tgz) file.
19.
Press Soft key (Exec).
A Backup is started.
A backup is completed.
TERMINAL SETUP
59
