manualshive.com logo in svg

NEC Univerge SV8100, Features And Specifications Manual

The NEC Univerge SV8100 System Hardware Manual is a comprehensive guide that provides detailed information on the functionality and operation of the SV8100 communication system. This invaluable manual can be freely downloaded from our website, ensuring easy access for users seeking in-depth knowledge on their NEC Univerge SV8100 product.

Share
Download
background image

Issue 13.0

UNIVERGE SV8100

2 - 1694

UCB (Unified Communications for Business)

Telephone calls (incoming DIT, ANA, DID, CO, or ring Transfer) terminate to a programmed queue.  
Each queue is programmed as a virtual extension so the number of queues depends on the total number 
of virtual extensions in the SV8100 system.  Any agent can take calls from any queue, based on 
customer Caller ID, agent skills, or routing choices made using the UCB graphical user interface (GUI) 
administration tool.  UCB delivers the incoming call either to the agent that has been idle the longest or 
in accordance with a programmed preference level.  Consideration can be made for concurrent activity 
by the agent on other medias (for example, queue Telephone calls can be blocked when the agent is 
currently engaged in a Web Chat with another customer).

Refer to the Q-Control product manual for additional information.

The UCB Announce Module

This module helps improve customer service levels and reduce abandonment rates to improve the 
effectiveness of the customer contact center.  Up to 99 queue progress announcements can be defined 
for each queue to provide Estimated Time To Answer (ETA) and position in queue (PIQ) that update 
dynamically to keep the customer informed of the progress while waiting in queue.  The customer can 
control the Announce module using the GUI Administration tool on their PC desktop.  Queue specific 
delay messages can be prerecorded and real-time customer announcements can be made.

An example follows:

When you are calling about a problem with your email, please be aware that we are currently working to 
resolve a problem with the email server; we expect to have this resolved by midday.  When you require 
assistance for another matter please hold for the first available team member.

For additional information, refer to the Q-Announce product manual.

The Q-Callback Module

This module enhances the Q-Announce Module to give a customer waiting in queue the option of 
leaving a callback request.  This helps to both reduce abandonment and balance call center workloads 
during peak periods.  Q-Callback takes the telephone number and a message and allows the caller to 
drop out of queue.  The callback request becomes a virtual call, and when an agent becomes available, 
the call is returned to the customer.  When the customer is unavailable when the agent calls back, the 
request is scheduled again and the original caller message, complete with callback attempt history, is 
presented to another agent at a later date and time.  Callbacks and Callback attempts are tracked and 
extensively incorporated in the Q-Reports.  Q-Callback is commonly used to allow customers to leave 
messages during CSR team meetings and after call center normal business hours.  Customer requests 
are queued and agents can address requests as soon as they log in.

For additional information refer to the Q-Callback product manual.

Summary of Contents for Univerge SV8100



































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Univerge SV8100

Samsung TL205 Quick Start Manual preview
TL205
Brand: Samsung Pages: 24
Samsung TL205 Manual Del Usuario preview
TL205
Brand: Samsung Pages: 100
Samsung ST65 Manual Del Usuario preview
ST65
Brand: Samsung Pages: 107
Samsung SL820 - Digital Camera - Compact Quick Start Manual preview
SL820 - Digital Camera - Compact
Brand: Samsung Pages: 22
Samsung SL820 - Digital Camera - Compact Manual Del Usuario preview
SL820 - Digital Camera - Compact
Brand: Samsung Pages: 95
Samsung SL630 Manual Del Usuario preview
SL630
Brand: Samsung Pages: 103
Samsung SL605 Manual Del Usuario preview
SL605
Brand: Samsung Pages: 99
Samsung SL502 - Digital Camera - Compact User Manual preview
SL502 - Digital Camera - Compact
Brand: Samsung Pages: 102
Samsung SL50 Manual Del Usuario preview
SL50
Brand: Samsung Pages: 98
Samsung SL35 - Digital Camera - Compact Quick Start Manual preview
SL35 - Digital Camera - Compact
Brand: Samsung Pages: 22
Samsung SL40 Manual Del Usuario preview
SL40
Brand: Samsung Pages: 98
Samsung SL35 - Digital Camera - Compact Manual Del Usuario preview
SL35 - Digital Camera - Compact
Brand: Samsung Pages: 102
Samsung SL201 - Digital Camera - Compact Manual Del Usuario preview
SL201 - Digital Camera - Compact
Brand: Samsung Pages: 98
Samsung SL102 - Digital Camera - Compact Quick Start Manual preview
SL102 - Digital Camera - Compact
Brand: Samsung Pages: 24
Samsung TL105 User Manual preview
TL105
Brand: Samsung Pages: 106
Samsung SL720 - Digital Camera - Compact User Manual preview
SL720 - Digital Camera - Compact
Brand: Samsung Pages: 96
Samsung SL820 - Digital Camera - Compact Quick Reference preview
SL820 - Digital Camera - Compact
Brand: Samsung Pages: 95
Samsung SL605 User Manual preview
SL605
Brand: Samsung Pages: 99

Brands by name

Popular brands

Load more brands