![background image](http://html1.mh-extra.com/html/nec/univerge-sv8100/univerge-sv8100_service-information-bulletin_3822052037.webp)
Document No. SIB 244
Page
37
of
52
1
st
July 2008
NEC Australia Pty Ltd shall not be liable for any direct, indirect, consequential or incidental damages about the use of the information included in this document.
The information in this technical documentation is advisory in nature and is subject to change. NEC may make improvements and changes in the products
described in this documentation without notice. Contents of this document are subject to change without prior notice at the discretion of NEC Australia Pty Ltd.
This document has been prepared for use by employees and dealers of NEC Australia Pty Ltd and may not be reproduced without prior written approval of NEC
Australia Pty Ltd.
5.
In
this
window,
uncheck
the
two
available
items,
then
OK.
6.
Connect
to
your
SV8100
and
download
Database.
7.
Click
Programming
>
Unregistered
Phones
>
IP
Phone
List
.
8.
Check
required
extensions
to
be
used
for
IP
DECT
numbers.
For
example,
extension
180
–
183
will
be
used.
9.
Set
MB
15
‐
05
‐
18
=
Group
1
for
required
extensions.
10.
Upload
database
changes.
11.
Register
all
IP
DECT
extensions
on
DAP
Manager
and
all
phones
will
function.