Issue 4.1
UNIVERGE SV8100
4 - 60
Installing the SV8100 Blades
4.4.1
Description
The PZ-4LCA and PZ-8LCE daughter boards are mounted on the
CD-4LCA/CD-8LCA. These boards provide:
4-Port Single Line and 8-Port Single Line analog extension ports (used
for on-premise analog telephones, fax machines, and analog modems).
.
The CD-4LCA/CD-8LCA is not rated for OPX use. A CD-4DIOPB blade
should be used instead (it supports the analog DID and single line
telephone interface functions, such as Off-Premise Extensions).
Connector for CD-4LCA and CD-8LCA Blades
One extension status LED
Two status LEDs
Ring Generator (75Vrms, 16Hz/20Hz/25Hz selectable by CM82-04-02)
Caller ID Sending Ability
Message Wait Lamping Ability (110Vdc)
Constant current type battery feeding (25mA / -28Vdc)
DC voltage (on-hook) (-28Vdc)
Feeding Polarity Reverse Ability
The CN2 (PZ-4LCA
/
PZ-8LCE) and CN3 (PZ-8LCE only) connectors
each provide connection to four analog station ports and are not
polarity sensitive. The PZ-8LCE consumes eight ports ranging
between ports 001~256 (remember that the 8SLIU consumes eight
ports).
Table 4-28 CD-4LCA/CD-8LCA Maximum Upgrade Capacities
SLIU
19”
Chassis
with CPU
19” Chassis
without CPU
19” Chassis
x4
Networked
Chassis
PZ-4LCA
5
6
23
32
PZ-8LCE
5
6
20
32
Summary of Contents for Univerge SV8100
