© 2009 by NEC Taiwan
SIP Trunk to Carrier
SIP Trunk to Carrier
<Important Notice>
SV8100 does NOT guarantee to work with any SIP Trunk Carrier even though the Carrier supports the
“Standard SIP” protocol. Connection test and evaluation are necessary before installing to the customer site.
<Important Notice>
<Important Notice>
SV8100 does NOT guarantee to work with any SIP Trunk Carrier eve
SV8100 does NOT guarantee to work with any SIP Trunk Carrier eve
n though the Carrier supports the
n though the Carrier supports the
“
“
Standard SIP
Standard SIP
”
”
protocol. Connection test and evaluation are necessary before i
protocol. Connection test and evaluation are necessary before i
nstalling to the customer site.
nstalling to the customer site.
Related Programming
Related Programming
• PRG 10-28
: Register the necessary basic information of SIP Trunk such
as Domain Name, Host Name, User ID and so on.
• PRG 10-29
: Register the necessary information of SIP Server such as
Proxy IP Address & Port Number, DNS Server IP Address &
Port Number, and so on. This PRG is not required in case the
SIP Trunk is non-registration mode.
• PRG 10-30
: Register the necessary information of SIP Authentication
information such as User Name, Password and so on.
• PRG 10-12-06 : Assign “1 : Enable” or “0 : Disable” to use NAPT Router.
(Default : 0 <Disable>)
After setup the basic setup for IP Trunk, the following related PRGs are set.
(Required PRG depends on the SIP Carrier.)
Summary of Contents for Univerge SV8100
