TERMINAL SETUP
31
TO SET A LANGUAGE
The procedure below shows how to set a language to be
displayed on LCD.
1.
Press Menu key while terminal is in an idle state..
2.
Select
□
1 User Settings.
3.
Select
□
3 Display.
4.
Select
□
5
Language
.
5.
Select a desired language.
For example, press [1] + [3] to select
□
13
English
.
The enabled item is highlighted.
Each item is displayed in its native language as follows:
6.
After the selection is completed, press Enter key
or the OK soft key.
TO ENABLE/DISABLE BACKLIGHT
FADE CONTROL
The procedure below shows how to enable/disable the backlight
fade control.
The backlight fades in or fades out when this setting is enabled.
1.
Press Menu key while terminal is in an idle state..
2.
Select
□
1 User Settings.
3.
Select
□
3 Display.
4.
Select
□
6 Advanced.
5.
Select
□
1 Backlight Fade Control.
6.
Select desired setting from
the
following list.
No.
Menu Item
Meaning
1 Disable
Backlight fade control of LCD is
disabled.
2 Enable
Backlight fade control of LCD is
enabled (default).
The enabled item is highlighted.
