NEC UX5000 Manual Download

Page: 234 / 588

Message Notification

216

◆

Chapter 2: Features

UX Mail Manual

Go back to Message Notifica-
tion Options Menu without
changing the priority order

Plays Help message at any menu level.

Entering Special Dial Codes

Function

Description

Dial Code

(Wait for sound)

Wait 2 seconds for any constant sound
(such as non-standard dial tone), then
continue if sound is detected.

(*4)

(Wait for dial tone)

Wait for CO dial tone and then continue.

(*9)

(Pause)

Wait 2 seconds and then continue.

(*7)

(Monitored pause)

Wait 2 seconds, and then continue if busy
tone or reorder tone are not detected.

(*6)

(Analyzed pause)

Wait 4 seconds, and then continue if busy
tone or reorder tone are not detected.

(*2)

Dials the digit *.

Dials the digit #.

Erase number

Erases the entire callout number.

Answering a Message Notification Callout

To answer a Normal Message Notification callout:
1.

Answer callout at programmed destination.

■

Voice mail must hear your answer to proceed.

Dial 1 to accept the Message Notification,
OR
Hang up to have Message Notification call back later.

Enter the mailbox’s Security Code (if requested).

You automatically log onto the user’s mailbox.

To answer a Radio Pager or Digital Pager Message Notification callout:
1.

Operation is automatic.

To answer a Message Delivery Message Notification callout:
1.

Answer callout at programmed destination.

■

Voice mail must hear your answer to proceed.

You hear all of the mailbox’s new messages.

■

The new messages are automatically saved in the mailbox.

Setting Up Message Notification

(Page 3 of 3)

Summary of Contents for UX5000













































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for UX5000

Reviews:

Related manuals for UX5000

Brands by name

Popular brands

NEC UX5000, Manual

Search results

Summary of Contents for UX5000

Reviews:

Related manuals for UX5000

Brands by name

Popular brands