NEC UX5000 Manual Download

Page: 557 / 588

Voice Prompts

UX Mail Manual

Chapter 4: Voice Prompts

◆

539

124. These are the options you have while listening to a recording:

To backup, then continue listening, press

To backup to the beginning and listen, press

B B

To go forward, then continue listening, press

To pause while listening, press the star key.
To continue listening after a pause, press the star key.
To turn the volume up, press

V U.

To turn the volume down, press

V D

To restore the volume to normal, press

V N

To exit the listen mode, press the pound key.

125. These are the options you have while making a recording:

To backup, then continue listening to the recording, press

To backup to the beginning and listen to the recording, press

B B.

To pause while recording, press the star key.
To continue recording after a pause, press the star key.
To erase the recording, press

To end recording, press the pound key.

126. To listen to your mailbox name, press

To record a new name, press

To erase your name, press

To exit this feature, press the pound key.

127. There is no name recorded for your mailbox.

To record your name, press

To exit this feature, press the pound key.

128. At the tone, please record your name so that I may announce your call. When you are done recording, press the

pound key.

129. The name has been erased.

130. Welcome to the System Administrator Menu.

For Broadcast messages, press

For Welcome messages, press

For Instruction Menu messages, press

For Directory Dialing Messages, press

DD.

For Announcement Messages, press

For Mailbox Names, press

To erase all messages in a mailbox, press

E M

To delete the security code of a particular mailbox, press

D S

For Answering Schedule Override, press

For Interactive Prompts, press

For System prompt Customization, press

To set the system time, press

To set the system date, press

To hear the System Version Number, press

To prepare the system for Power-Down, press

To exit this menu, press the pound key.

131. There are no interactive prompts recorded.

Table of Voice Prompts

Summary of Contents for UX5000













































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for UX5000

Reviews:

Related manuals for UX5000

Brands by name

Popular brands

NEC UX5000, Manual

Search results

Summary of Contents for UX5000

Reviews:

Related manuals for UX5000

Brands by name

Popular brands