NEC UX5000 Manual Download

Page: 569 / 588

Voice Prompts

UX Mail Manual

Chapter 4: Voice Prompts

◆

551

337. Please enter the mailbox number for the directory dialing message.

338. Please enter the mailbox number of the directory dialing message you wish to copy.

339. Again, please note. The reference number for your call is ______.

340. Enter the new time of day for the voice mail system’s clock.

You must enter a two-digit number for the hour, then a two digit number for the minute, followed by an

for

or a

for

For example: Eight-Oh-Five

A-M

would be entered as

8, 0-5,

To re-enter the time if you make a mistake, press the star key.
To exit this feature, press the pound key

341. Enter the new date for the voice mail system’s clock.

You must enter a two-digit number for the month, day, and year.
For example: April 25th 1992 would be entered as

0-4, 2-5, 9-2.

To re-enter the date if you make a mistake, press the star key.
To exit this feature, press the pound key.

342. The new system date and time will be _______.

343. The system clock has been adjusted.

344. The system clock currently reads _______.

345. Your security code is required to confirm system shutdown.

346. All voice mail ports are idle.

347. Activity has been detected in the voice mail system.

To allow the activity to cease before shutting down, press

To shut down immediately, press

To cancel the shut down, press the pound key.

348. Starting shut down.

Please stay on the line until notified that shutdown is complete.
To cancel the shutdown, press the pound key now.

349. Shut down of the voice mail system has been completed.

It is now safe to power-down or reset the voice mail computer.

350. Shut down of the voice mail system has been aborted.

351. Waiting for voice mail activity to cease.

352. Disregarding ongoing voice mail activity.

353. The system clock could not be adjusted to the specified settings. Please try again.

354. Shutdown cannot be initiated from this mailbox.

Only system administrator mailboxes which have been programmed with a security code are permitted to shut
down the voice mail system.

355. The revision level of the voice mail system software is _______.

356. It is no longer possible to abort the operation.

357. Your security code will NOT be requested.

358. Your security code will be requested.

359. Wait for sound.

Table of Voice Prompts

Summary of Contents for UX5000













































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for UX5000

Reviews:

Related manuals for UX5000

Brands by name

Popular brands

NEC UX5000, Manual

Search results

Summary of Contents for UX5000

Reviews:

Related manuals for UX5000

Brands by name

Popular brands