NEC UX5000 Manual Download

Page: 572 / 588

Voice Prompts

554

◆

Chapter 4: Voice Prompts

UX Mail Manual

419. _____ nine _____

420. _____ ten _____

421. _____ eleven _____

422. _____ twelve _____

423. _____ one _____

424. _____ two _______

425. _____ three _____

426. _____ four _____

427. _____ five _____

428. _____ six _____

429. _____ seven _____

430. _____ eight _____

431. _____ nine _____

432. _____ ten _____

433. _____ eleven _____

434. If you would like to be called back to receive your

FAX

order, press

Or, if the

FAX

machine to receive your order is connected to the telephone you are using, press

435. That is an invalid entry.

436. Please enter the number that I will need to dial to reach your

FAX

machine, then press the pound key.

For long-distance calls, please include the leading

‘1’

and, if necessary, the area code.

To cancel this

FAX

transaction, press only the pound key.

437. You have entered too many digits.

438. I’m sorry. You did not enter a complete

FAX

Callback number.

439. I’m sorry. I cannot make a call to your

FAX

machine at the telephone number that you have entered.

440. Your

FAX

telephone number is _____.

441. If this is correct, press

If this is incorrect, press

442. Or, to hear a list of available documents, press the star key.

443. You may order up to _____.

444. You may order only one document.

445. _____ documents.

446. You have ordered the maximum number of documents.

447. Please enter the number of the document you would like to receive, then press the pound key.

448. When you are finished ordering, press

ONLY

the pound key.

449. I’m sorry. You did not enter a complete document number.

450. I’m sorry. There is no document assigned to that number.

451. To have your extension number appear on your

FAX

order, enter that number now, then press the pound key.

Otherwise, press only the star key.
To cancel this

FAX

transaction, press only the pound key.

Table of Voice Prompts

Summary of Contents for UX5000













































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for UX5000

Reviews:

Related manuals for UX5000

Brands by name

Popular brands

NEC UX5000, Manual

Search results

Summary of Contents for UX5000

Reviews:

Related manuals for UX5000

Brands by name

Popular brands