NEC UX5000 Manual Download

Page: 576 / 588

Voice Prompts

558

◆

Chapter 4: Voice Prompts

UX Mail Manual

524. _____ held messages _____.

525. _____ one held message _____ .

526. _____ and one saved message.

527. _____ and one held message.

528. To listen to your new messages, press

To record and send a message, press

R S.

For the complete Main Menu of features, press

529. To listen to your held messages, press

To record and send a message, press

R S.

For the complete Main Menu of features, press

530. To listen to your saved messages, press

To record and send a message, press

R S.

For the complete Main Menu of features, press

531. The message will be erased when you exit your mailbox.

To save the message, press

S A.

To listen to the next new message, press

To exit the listen mode, press the

Pound key.

For a complete list of listening options, press

532. The message will be erased when you exit your mailbox.

To save the message, press

S A.

To listen to the next held message, press

To exit the listen mode, press the

pound

key.

For a complete list of listening options, press

533. The message will be erased when you exit your mailbox.

To save the message, press

S A

To listen to the next saved message, press

To exit the listen mode, press the

pound

key.

For a complete list of listening options, press

534. The message has been saved.

To erase the message, press

To listen to the next new message, press

To exit the listen mode, press the

pound

key.

For a complete list of listening options, press

535. The message has been saved.

To erase the message, press

To listen to the next held message, press

To exit the listen mode, press the

pound

key.

For a complete list of listening options, press 0.

536. The message has been saved.

To erase the message, press

To listen to the next saved message, press

To exit the listen mode, press the

pound

key.

For a complete list of listening options, press

537. I’m sorry. The System Line is currently in use.

538. ________ the destination mailbox was full.

Table of Voice Prompts

Summary of Contents for UX5000













































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for UX5000

Reviews:

Related manuals for UX5000

Brands by name

Popular brands

NEC UX5000, Manual

Search results

Summary of Contents for UX5000

Reviews:

Related manuals for UX5000

Brands by name

Popular brands