NEC UX5000 Manual Download

Page: 584 / 588

Voice Prompts

566

◆

Chapter 4: Voice Prompts

UX Mail Manual

671. Welcome to the System Administrator menu.

For Broadcast messages, press

For Welcome messages, press

For Instruction menu messages, press

For Directory Dialing messages, press

For Announcement messages, press

For Mailbox Names, press

To erase all messages in a mailbox, press

To delete the Security Code of a particular mailbox, press

For Hotel Guest Management options, press

For Answering Schedule override, press

For Music on Hold, press

For Interactive Prompts, press

For System Prompt Customization, press

To set the System Time, press

To set the System Date, press DT.
To hear the System Version number press

To prepare the system for Power Down, press

To exit this menu, press the pound key.

672. Not used

673. All messages have been erased.

674. You may not forward this message because it has been marked as Confidential.

675. Start recording your Urgent message at the tone.

When you are done, press the pound key or hang up.

676. Start recording your Confidential message at the tone.

When you are done, press the pound key or hang up.

677. The message has been marked as Confidential.

678. The message has been marked as Urgent.

679. The following Urgent message was returned to you because the recipient has not listened to it.

680. This Urgent message was sent on _____.

681. Not used.

682. The Urgent Message priority for this group is number _____.

683. There is no Urgent Message priority assigned to this group.

684. Unless you assign a priority to it, this group will never be used.

685. When notifying you of an Urgent Message, the active notification groups will be used in this order: ____.

686. Group _____.

687. None of your notification groups has been assigned a priority for Urgent message notification.

688. Please specify which notification group should be called first when you have an Urgent message.

689. Please specify which notification group should be called next when you have an Urgent message.

690. Please specify which notification group should be called last when you have an Urgent message.

Table of Voice Prompts

Summary of Contents for UX5000













































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for UX5000

Reviews:

Related manuals for UX5000

Brands by name

Popular brands

NEC UX5000, Manual

Search results

Summary of Contents for UX5000

Reviews:

Related manuals for UX5000

Brands by name

Popular brands