NEC UX5000 Manual Download

Page: 356 / 588

Customize
Dial Action Tables

338

◆

Chapter 3: Programming

UX Mail Manual

Additional Information

●

for more.

REC1U Action – Quick Urgent Message with Greeting

Use this key action to allow an Automated Attendant caller to leave a Quick Urgent Message at an exten-
sion. With this action, the caller

will

hear the extension’s greeting prior to leaving the message.

Number Option

●

To have the caller leave a Quick Urgent Message at a specific extension, the corresponding

Number

option should be the extension number.

●

To have the caller leave a Quick Urgent Message at any caller-dialed extension (of any length), the
corresponding

Number

option should be IV.

●

To have the caller leave a Quick Urgent Message at a caller-dialed extension in a specific range, the cor-
responding

Number

option should be XXX. For example, to allow callers to leave a Quick Urgent Mes-

sage for extensions 300-399, for key 3 enter REC1 in the

Action

field and XXX in the

Number

field.

Additional Information

●

for more.

REC2C Action – Quick Confidential Message without Greeting

Use this key action to allow an Automated Attendant caller to leave a Quick Confidential Message at an
extension. With this action, the caller

will not

hear the extension’s greeting prior to leaving the message.

Instead, the caller hears the voice prompt “

Recording”

followed by a beep.

Number Option

●

To have the caller leave a Quick Confidential Message at a specific extension, the corresponding

Number

option should be the extension number.

●

To have the caller leave a Quick Confidential Message at any caller-dialed extension (of any length),
the corresponding

Number

option should be IV.

●

To have the caller leave a Quick Confidential Message at a caller-dialed extension in a specific range,
the corresponding

Number

option should be XXX. For example, to allow callers to leave a Quick

Confidential Message for extensions 300-399, for key 3 enter REC1 in the

Action

field and XXX in

the

Number

field.

Additional Information

●

for more.

REC2U Action – Quick Urgent Message without Greeting

Use this key action to allow an Automated Attendant caller to leave a Quick Urgent Message at an exten-
sion. With this action, the caller

will not

hear the extension’s greeting prior to leaving the message. Instead,

the caller hears the voice prompt “

Recording”

followed by a beep.

Number Option

●

To have the caller leave a Quick Urgent Message at a specific extension, the corresponding

Number

option should be the extension number.

●

To have the caller leave a Quick Urgent Message at any caller-dialed extension (of any length), the
corresponding

Number

option should be IV.

●

To have the caller leave a Quick Urgent Message at a caller-dialed extension in a specific range, the cor-
responding

Number

option should be XXX. For example, to allow callers to leave a Quick Urgent Mes-

sage for extensions 300-399, for key 3 enter REC1 in the

Action

field and XXX in the

Number

field.

Additional Information

●

for more.

Summary of Contents for UX5000













































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for UX5000

Reviews:

Related manuals for UX5000

Brands by name

Popular brands

NEC UX5000, Manual

Search results

Summary of Contents for UX5000

Reviews:

Related manuals for UX5000

Brands by name

Popular brands