NEC UX5000 Manual Download

Page: 392 / 588

Customize
Mailbox Options: Guest: [Message Notification]

374

◆

Chapter 3: Programming

UX Mail Manual

[Message Notification]

Local Callouts

Use this option to enable or disable the ability of the

Guest Mailbox user

to enter local numbers for their

Message Notification callout numbers. Voice mail defines local numbers as 5-8 digits long.

●

for more.

The following toll-free numbers are also considered local callouts:

- 1-800-XXX-XXXX
- 1-877-XXX-XXXX
- 1-888-XXX-XXXX

Options

●

Yes

Default

✔

Yes

[Message Notification]

Long Distance Callouts

Use this option to enable or disable the ability of the

Guest Mailbox user

to enter long distance numbers for

their Message Notification callout numbers. Voice mail defines long distance numbers as more than 8 digits
long.

●

for more.

Options

●

- The Guest Mailbox user

cannot

enter long distance callout numbers.

●

Yes

- The Guest Mailbox user

can

enter long distance callout numbers.

●

Some

- The Guest Mailbox user can enter the long distance callout numbers specified in

Area Codes

below.

Default

✔

[Message Notification]

Allowed Area Codes

If you entered

Some

for the

Long Distance Calls

option above, use this option to select up to 4 area codes the

Guest Mailbox user may enter for their long distance callouts. If you entered

Some

for the

Long Distance

Calls

option and don’t enter area codes in this option, the Guest Mailbox user cannot enter long distance

callout numbers.

●

for more.

Options

●

Area code

(3 digits maximum, using 0-9).

- Enter the area code you want the Guest Mailbox user to be able to enter for long distance callouts.

You make 1 entry for each

Index

(for a total of 4 Area Codes maximum).

●

(None)

Default

✔

(None)

- There are no area codes defined.

Summary of Contents for UX5000













































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for UX5000

Reviews:

Related manuals for UX5000

Brands by name

Popular brands

NEC UX5000, Manual

Search results

Summary of Contents for UX5000

Reviews:

Related manuals for UX5000

Brands by name

Popular brands