NEC UX5000 Manual Download | Manualshive

Page: 435 / 588

background image

Customize

Mailbox Options: Network: [Network]

UX Mail Manual

Chapter 3: Programming

◆

417

3

[Network]

Auto Forwarding

Use this option to set how Auto Forward operates at the Network Mailbox. The options are:

●

Disabled

An extension user logging onto the Network Mailbox user

cannot

set up Auto Forwarding using the

OP

+

AF

options.

●

Forward and Save

- An extension user logging onto the Network Mailbox user

can

set up Auto Forwarding using the

OP

+

AF

options.

- A message left in the Network Mailbox is delivered as a new message to both the network destina-

tion and the mailbox to which the message is forwarded.

●

Forward and Erase

- An extension user logging onto the Network Mailbox

can

set up Auto Forwarding using the

OP

+

AF

options.

- A message left in the Network Mailbox is delivered only to the mailbox of the forwarding destina-

tion. The message

is not

delivered to the network destination.

●

Options

●

No

(Disabled - see above).

●

FWD Save

(Forward and Save - see above).

●

FWD Erase

(Forward and Save - see above).

Default

✔

FWD Save

(Forward and Save - see above).

[Network]

Message Retention

Use this option to determine how long a Network Mailbox will retain held and saved messages. The system
automatically deletes messages from the Network Mailbox after it deletes them, but the mailbox could accu-
mulate saved messages as follows:

●

An extension user logs onto the Network Mailbox before the message has been delivered.

●

The user then listens to and saves the undelivered message.

●

If the message

never

gets delivered, it remains in the Network Mailbox as a saved message. (Note that

the message is deleted from the Network Mailbox as soon as it is delivered.)

If a message is left in a Network Mailbox longer than the Message Retention interval, voice mail deletes it.

●

Voice mail performs its Message Retention deletions at midnight of the day the message was marked
for deletion. For example, if the mailbox has 1 day Message Retention, any messages left on Wednes-
day are deleted at midnight on Thursday.

●

for more.

Options

●

I

(Indefinite - never deleted)

●

1-90

(1-90 days)

Default

✔

I

(Indefinite - never deleted)

[Network]

Miscellaneous: Alternate Next CRMB Dial Option

Refer to

Mailbox Options: Network:

.

This is a duplicate of that

option.

«
...
433
434
435
436
437
...
»

Summary of Contents for UX5000













































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for UX5000

Brand: T-Mobile Pages: 4

Brand: T-Mobile Pages: 158

Brand: T-Mobile Pages: 212

Brand: RATH MICROTECH Pages: 2

Brand: Bea-fon Pages: 70

Brand: i.safe MOBILE Pages: 72

Brand: Sprint PCS Pages: 145

Brand: Yealink Pages: 8

Brand: Samsung Pages: 159

Brand: Samsung Pages: 171

Brand: Samsung Pages: 158

SPH-A580 Series

Brand: Samsung Pages: 156

Brand: Samsung Pages: 156

Brand: Samsung Pages: 153

Brand: Samsung Pages: 156

Brand: Samsung Pages: 72

Brand: Samsung Pages: 140

Brand: GENERAL MOBILE Pages: 56

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands